New environmental protection film TET (without AEEA, APEO)

Physical and chemical indicators:

   --Composition: fatty acid and organic amine compound

   --Appearance: light yellow flakes

   --PH value: 3-5 (5-10% slurry)

   --Ionicity: Weak cation

Chemical method:

-Slowly stir the soft tablet into room temperature water at a rate of 5-8%, gradually increase the temperature to 65-70 ° C, and then stir at a low speed until it is completely dissolved and ready for use.

Performance and characteristics:

-Give the fabric a good soft, smooth and full feel;

-Has good salt resistance and alkali resistance;

-Has low foaming properties;

--Excluding AEEA and APEO;

    --Meet the requirements of Oeko-tex Standard 100, and comply with the requirements of the ban and limit regulations in the EU "REACH" regulations.

Scope of application:

--Low foam, low viscosity;

--It has a very low yellowing coefficient and can be used for fabrics with strict color requirements;

--Feeling characteristics of cationic film;

--It has extremely strong salt and electrolyte resistance;

--Suitable for any dyeing and finishing process.

Application method:

--Dip-rolling type: 2-3g / L, temperature 30-40 ℃, two-dip two-roll or one-dip one-roll

--Immersion type: 0.3-0.8% (o.w.f), bath ratio 1: 10-15, temperature 40-50 ℃, 30min.

Storage and packaging:

-Store in a cool warehouse with a storage period of 12 months;

--Package is 25kg / bag, plastic woven bag.